Color Treatments

Not every diamond leaves the earth in the color the market wants. Brown stones outnumber colourless ones by a wide margin. Yellow tints that push a diamond below the J–K range on the GIA D-to-Z scale can halve its price overnight. Meanwhile, vivid fancy colours — the deep blues, saturated pinks, and electric greens that collectors pursue — occur so rarely that most jewellers never handle one.

Diamond color treatment bridges this gap. Through controlled physical and chemical processes, skilled technicians can shift a diamond's hue: lighten an unwanted brown, deepen a pale yellow into a vivid canary, or introduce a blue or green that nature produces only once in thousands of carats. The result is a stone that looks dramatically different from the rough it started as — sometimes indistinguishable from a natural fancy colour to the unaided eye.

The key word is disclosure. Every colour treatment must be declared to the buyer. GIA, the Federal Trade Commission, and every reputable trade body require it. A treated diamond is not a lesser stone — but it is a different proposition from an untreated one, and its price should reflect that.

The Five Methods

Color treatments fall into five principal categories. Each works through a different mechanism, and each leaves a different fingerprint that trained gemologists can detect.

Irradiation

High-energy particles — electrons, neutrons, or gamma rays — bombard the diamond, displacing carbon atoms in the crystal lattice. The resulting vacancy defects absorb certain wavelengths of light, producing colour. Irradiation alone most commonly yields green, blue-green, or blue. The process is permanent: GIA issues full grading reports for irradiated diamonds and laser-inscribes the girdle to indicate treatment.

Commercial irradiation has been in use since the late 1940s. Detection relies on characteristic colour zoning patterns (the "umbrella effect" from cyclotron treatment, or facet-following colour from electron beams) and spectroscopic signatures at 741 nm.

→ Full article: Irradiation

Annealing After Irradiation

Controlled heating of an irradiated diamond — typically between 500°C and 1,000°C — causes the vacancy defects to migrate and combine with nitrogen atoms, creating entirely new colour centres. This shifts the diamond's hue along a predictable sequence: blue-green gives way to brown, then orangey-yellow, then yellow. At higher temperatures, nitrogen-vacancy (NV) centres can form, producing the rare pinks and reds that command extraordinary premiums in their natural form.

This two-step process (irradiate, then anneal) is the most versatile colour treatment available, capable of producing a wider palette than any single method. The treatment is permanent and stable.

→ Full article: Annealing After Irradiation

HPHT Treatment

High Pressure, High Temperature processing recreates the conditions of diamond formation itself — 5 to 6 GPa of pressure at 1,300–1,600°C. Its most celebrated application is converting brown Type IIa diamonds to colourless or near-colourless grades. A stone that entered the press as a J-colour brown can emerge as a D or E, its lattice defects from plastic deformation effectively healed.

HPHT can also push Type Ia diamonds toward yellow or, more rarely, produce green hues. The treatment is irreversible. Detection requires advanced photoluminescence spectroscopy, making it one of the harder treatments to identify without laboratory equipment.

→ Full article: HPHT Treatment

Coating

The simplest and oldest approach: applying a thin film to the diamond's surface — typically the pavilion facets — to alter its apparent colour. Modern coatings range from silica-based films doped with gold or silver oxide (the "Serenity" treatment) to boron-doped CVD diamond layers that produce a convincing blue.

Unlike every other method on this list, coating is not permanent. It can be scratched during normal wear, destroyed by a jeweller's torch, or stripped by ultrasonic cleaning. For this reason, GIA does not issue grading reports for coated diamonds.

→ Full article: Coating Treatment

Multi-Step Treatments

Some of the most sophisticated treated colours require a sequence of processes — for example, HPHT annealing followed by irradiation and then moderate heating. These "designer colour" treatments target specific defect structures, particularly the nitrogen-vacancy centres responsible for pink and red hues. Detection demands layered spectroscopic fingerprinting, making multi-step treatments the most challenging to identify.

→ Full article: Multi-Step Treatments

How Do Treated Diamonds Compare to Natural Fancy Colours?

To the naked eye, a well-executed colour treatment can be virtually identical to a natural fancy colour. The difference lies at the atomic level — in the specific arrangement of colour centres, the distribution of hue through the stone, and the spectroscopic signatures that GIA's instruments reveal.

The market treats them very differently. Natural fancy-colour diamonds, especially in saturated pinks, blues, and greens, are among the rarest and most valuable gemstones on earth. Treated diamonds of comparable appearance typically sell for 30–50% less than their natural equivalents. This is not a quality judgment — it is a rarity premium.

Detection and Disclosure

GIA classifies colour treatments into two categories:

Category	Treatments	Permanent?	GIA Report?
Stable	Irradiation, annealing, HPHT	Yes	Yes — with treatment notation and girdle inscription
Unstable	Coating	No	No

Detection methods vary by treatment but include:

Magnification: Colour zoning patterns, surface films, facet-following distribution
Spectroscopy: Absorption features (741 nm for irradiation), photoluminescence ratios (575/637 nm for HPHT), colour-centre analysis
Chemical analysis: EDXRF for coating composition

For buyers, the practical takeaway is straightforward: always require a current GIA or AGS laboratory report. A grading report from a recognised laboratory is the single most reliable protection against undisclosed treatment.

Frequently Asked Questions

What is a diamond color treatment?

A diamond color treatment is a controlled physical or chemical process that alters a diamond's hue. Methods include irradiation, annealing, HPHT processing, surface coating, and multi-step combinations. Every color treatment must be disclosed to the buyer.

Are color-treated diamonds real diamonds?

Yes. Color-treated diamonds are natural diamonds whose colour has been modified by human intervention. They retain all the physical properties of diamond — hardness, brilliance, fire — but their colour was introduced or enhanced deliberately rather than by geological processes alone.

How much cheaper are treated colored diamonds?

Treated fancy-colour diamonds typically sell for 30–50% less than natural equivalents of comparable appearance. The exact discount depends on the treatment type, the resulting colour, and the diamond's size and quality.

Can a jeweller tell if a diamond has been color-treated?

Some treatments (coating, irradiation with visible zoning) can be identified under standard magnification. Others, particularly HPHT treatment, require advanced spectroscopic equipment available only in gemological laboratories. A current GIA report is the most reliable way to confirm treatment status.

Is HPHT treatment permanent?

Yes. HPHT treatment permanently alters the diamond's crystal lattice. The colour change cannot be reversed, and the diamond can be cleaned, worn, and repaired like an untreated stone.

Treatments & Enhancements — Section overview covering all treatment categories
Clarity Treatments — Laser drilling and fracture filling explained
Treated Diamond Care & Risks — Care protocols for each treatment type

Sources: GIA Diamond Treatments, GIA Gems & Gemology — History of Diamond Treatments, GIA — HPHT Treatment Spectroscopy

Tratamientos del color

Irradiación

Recocido tras irradiación

Tratamiento HPHT

Recubrimiento

Tratamientos de múltiples pasos