Overview

Two diamonds sit side by side. Both weigh 1.00 ct. Both are round brilliants. One carries a GIA report grading it G colour, VS2 clarity. The other carries a report from a different laboratory with the same grades. Are they equivalent stones? Not necessarily — and the difference is not a flaw in the system. It is a consequence of how diamond grading works.

Diamond grading is an expert assessment, not a scientific measurement. When a gemologist evaluates colour, they compare the stone against a calibrated set of master diamonds under controlled lighting. When they assess clarity, they examine the stone under 10x magnification and judge whether inclusions cross the threshold between grades. These evaluations require training, experience, and judgment. And where judgment is involved, different experts — and different institutions — will sometimes reach different conclusions.

This is not unique to diamonds. Wine scores vary between critics. Medical diagnoses vary between doctors. The question is not whether variation exists, but how much variation is acceptable and how to account for it when making purchasing decisions.

For Czech consumers comparing diamonds across European and international dealers, understanding laboratory differences is a practical skill. A stone that appears to be a bargain may simply carry grades from a laboratory with more generous calibration. A stone that looks expensive may reflect the conservative grading of a laboratory whose grades the market trusts most. The articles in this cluster explain why these differences occur, how large they tend to be, and how to use that knowledge when shopping.

Key Concepts

Where Grading Is Objective — and Where It Is Not

Not all aspects of diamond grading are equally subjective. Carat weight is measured on a calibrated scale to the hundredth of a carat. No two laboratories will disagree on whether a diamond weighs 1.01 ct or 1.02 ct. Similarly, measurements — length, width, depth — are instrument-derived and consistent across labs.

Cut grading for round brilliants has become increasingly objective since GIA introduced its cut grade system in 2005. Crown angle, pavilion angle, table percentage, and other proportions are measured with optical scanning devices, and the grade is derived from a model of light performance. While laboratories differ in how they weight these parameters, the underlying data is the same.

Colour and clarity are where subjectivity enters. Colour grading relies on comparing the diamond face-down against a set of master stones — reference diamonds that define the boundary between grades. GIA's master stone protocol is the industry benchmark, but each laboratory maintains its own set and its own internal calibration. A stone that falls precisely on the G/H boundary may be called G at one lab and H at another, and neither assessment is wrong. Both are defensible interpretations of a borderline case. See Laboratory Profiles for how each major lab approaches these assessments.

Clarity grading requires a gemologist to identify, map, and evaluate inclusions under 10x magnification. The distinction between VS2 and SI1, for example, depends on whether inclusions are considered "minor" or "noticeable" — a judgment that involves the inclusion's size, position, relief, and nature. Experienced graders at the same laboratory will occasionally disagree; graders at different laboratories, working from slightly different internal benchmarks, disagree somewhat more often.

The Role of Master Stones and Internal Calibration

Colour grading begins with master stones — a set of diamonds that define the boundary between each colour grade from D through Z. GIA created the original D-to-Z scale and maintains master sets that serve as the global reference. Other laboratories calibrate their own sets against the GIA standard, but maintaining perfect alignment is difficult.

Over time, subtle shifts can accumulate. A laboratory's internal calibration may drift slightly warmer or cooler relative to GIA. Some labs are known to grade colour one step more generously on average — meaning their G colour might correspond to what GIA would call H. This is not fraud; it is a calibration difference. But it translates directly into price: a G colour commands a higher price than an H, regardless of which laboratory assigned the grade.

Why It Matters for Price Comparison

Diamond pricing in wholesale and retail markets is anchored to the Rapaport Price List, which assumes GIA grading. When a diamond carries a GIA report, traders and retailers can price it directly against the list. When a diamond carries a report from another laboratory, the trade applies an informal discount to account for potential grading differences.

For Czech consumers, this means that comparing two diamonds graded by different laboratories at face value is misleading. A 1.00 ct G/VS2 with a GIA report and a 1.00 ct G/VS2 with a report from a more generous laboratory are not interchangeable. The GIA-graded stone will typically cost more — and that premium reflects the market's assessment of grading reliability, not a markup for the logo on the report.

Understanding this dynamic protects you from two common mistakes: overpaying for a generously graded stone because the grades look equivalent to a GIA report, or dismissing a GIA-graded stone as overpriced without accounting for the difference in grading standards.

Practical Tips

Standardise your comparison. When evaluating multiple diamonds, try to compare stones graded by the same laboratory. If you must compare across labs, treat the grades as starting points rather than definitive equivalences. See Why Grading Differs Between Labs for specific calibration patterns.
Know the lab before you compare the price. Before deciding that one diamond is cheaper than another, check which laboratory graded each stone. A lower price paired with a less conservative grading lab may not represent a better deal — it may represent a different assessment of the same quality range.
Focus on colour and clarity differences. These are the grades where laboratory variation has the greatest financial impact. Cut grades and carat weights are largely consistent across major labs and can be compared more directly.
Use GIA as your mental benchmark. Because the trade prices to GIA standards, using GIA grades as your reference point simplifies comparison. When you encounter a report from another lab, ask: "Would GIA have graded this the same way?" The answer is often "possibly one grade lower," and that adjustment is worth factoring into your budget.
Verify every report online. Regardless of which laboratory issued the report, confirm the grades through the lab's online verification tool before purchase. This step is free and takes under a minute. See Online Report Verification.

What the Child Articles Cover

Why Grading Differs Between Labs — a detailed examination of where and why grading variation occurs, including documented calibration patterns between GIA, HRD, IGI, and other laboratories, with guidance on how to adjust expectations when comparing cross-lab grades.
Arete Lab Preferences — which grading laboratories Arete Diamond accepts and recommends, the reasoning behind those preferences, and practical guidance for Czech buyers choosing between GIA, HRD, and IGI reports.

Laboratoriumvergelijking

Waarom beoordeling kan verschillen tussen laboratoria

Waarom Arete Diamond bepaalde laboratoria verkiest